Security Training Script
*Make sure your trainee requests the SEC badge before you continue. Use the SEC flag on the hallways/training room.*
*Go to the discord server and open the #requests channel. Type '@BA SEC badge for [trainee's username]', then press enter*
*Once you post the request, start the training; do NOT wait for the badge to be accepted first.*
Welcome to Security Training. I will be your trainer for today.
Your new job as a security member is to guard the security station,
providing access for certain HDA members.
You will learn how to inspect members and how to move them to their appropriate places.
Please pay attention during this training session. You may also take notes for the test later on.
Any questions before we begin?
*Only answer questions that are relevant to the training.*
Part of being a security member is the use of the HDA Portal's Security Search feature.
This feature helps you verify which people can enter HDA's premises.
Please log in on the HDA portal right now.
Once you are logged in, look for the section on the left side of your screen called 'Portal Index'.
Under this section, click 'Tools', and then click 'Security Search'.
Please let me know once you have opened the Security Search page.
*Wait for the member.*
Let's say you are currently inspecting a user named 'Testing123'.
On the search bar, type the Agent Name–in this case, type 'Testing123'.
Please pay attention to the spelling. The portal will guide you with suggestions.
To perform the search, press enter or click the appropriate suggestion from the list.
You will now see information regarding this user.
From this information, can you please tell me their current motto?
*The correct answer is [HDA] Agent II [SD16].*
*If incorrect, you may need to break down the steps on how to use the search bar.*
The search feature provides you information regarding the user you are inspecting.
The first one is the motto. You must always make sure this matches their current motto on Habbo.
If this is not the case, ask them to correct it.
The other information is their status. There are three of them:
1. CHECK FOR [HDA] Recruit – in color red; ensure they have [HDA] Recruit as their motto,
then put them into training.
2. ALLOWED – in color green; they are allowed access to HDA's premises, in other words, the base.
3. USE OP GATE – in color yellow; they are also allowed access,
but should instead use a different entry point.
Is this clear? Do you have any questions so far?
*Only answer questions regarding the Security Search feature.*
You must always follow the instructions and information provided by the portal.
If you are found letting in people that do not work for HDA, you are at risk of being demoted or fired.
Additionally, we have a Do Not Hire List on our website; hda-habbo|com/do-not-hire|html
You are required to check this list as well. This contains a list of people who cannot enter HDA.
To help you navigate, press CTRL+F or CMD+F and type the name of the user you are inspecting.
If their name is highlighted on the list, you will need to block them from going through security.
Is this clear? Do you have any questions so far?
*Only answer questions regarding the Security Search feature and the Do Not Hire list.*
Another part of being a security member is filling the security station itself.
To 'FS' is to 'Fill Security'. You should FS especially when a user appears at the station.
All security members are of priority on this station.
If you find the station full, you can ask for a seat from non-security members.
*Take a seat on the chair right between the two security stations.*
Please now FS. Pick any one of the seats.
We will now learn the commands to control the security station. I encourage you to take notes.
Are you ready to begin the second half of your training? This requires full attention.
*Flick the switch.*
There are TWO gates you need to control. The first gate has ONE single command.
The command for the first gate is '-gate'. This moves the user to your desk, allowing you to inspect them.
You must always say -gate before doing all the other commands.
*Wait for them to say -gate before you continue.*
The next command is '-base'. This lets the user enter the HDA premises, teleporting them to FTB.
Before using this command, please check out for these things:
1. Their username does not appear on the Do Not Hire list.
2. The Security Search feature responds with the green or yellow status, NOT the red status.
If the portal gives a yellow status, remind the user to use the OP gate next time.
Notify a high rank if they return.
3. Their motto matches the portal, and that they have badges from HDA-Founder or HDA-Mother.
If the member passes all of these requirements, you are allowed to let them in.
Is this clear? Do you have any questions regarding the command?
*Only answer questions regarding the -gate and -base commands, and the two different security gates.*
If you understand the command, please say '-base' now to let me in base.
*Return to the seat near the switches and flick the switch. Make sure they use -gate to bring you back near the second gate.*
Always use the '-gate' command before you continue. Otherwise, the other commands will not work.
The next command is '-training'. This brings a recruit to the training station.
Before using this command, please check out for these things:
1. Their username does not appear on the Do Not Hire list.
2. The Security Search feature responds with the red status.
3. They are wearing the HDA badge and that they do not have badges from other agencies.
You are expected to look for these badges.
Never let a recruit get trained without removing these badges first.
If the member passes all of these requirements, you are allowed to get them trained.
Is this clear? Do you have any questions regarding the command?
*Only answer questions regarding the security commands.*
If you understand the command, please say '-training' now to bring me to the training station.
*Return to the seat near the switches and flick the switch. Make sure they use -gate to bring you back near the second gate.*
The next command is '-lobby'. This teleports the user to the lobby, in front of the front desks.
Only use this command on these certain conditions:
1. A user who is idling on your desk.
2. A user who does not work in HDA.
3. A user who does not have the right motto or badges,
or a user who refuses to leave badges from other agencies.
Is this clear? Do you have any questions regarding the command?
*Only answer questions regarding the security commands.*
If you understand the command, please say '-lobby' now to bring me back outside base.
*Return to the seat near the switches and flick the switch. Make sure they use -gate to bring you back near the second gate.*
The last command is '-kick'. This kicks the user out of the room itself, back to the Hotel View.
This command is used when:
1. A user listed on the Do Not Hire list.
2. A user who is trolling or threatening you or others in base.
3. A user who is not following HDA rules, such as spamming, dancing or using color chat.
Politely ask them to stop. If they continue disrupting base, feel free to use this command.
Is this clear? Do you have any questions regarding the command?
*Only answer questions regarding the security commands.*
If you understand the command, please say '-kick' now.
*Return to the trainers seat.*
To recap, the commands for security are '-gate -base -training -lobby -kick'.
Always use the '-gate' command before you use all the other commands.
Otherwise, the other commands will not work.
Any questions before we begin the test?
*Wait for the member to respond.*
We will now begin the test. There will be 4 questions on what you have just learnt.
You must get 3 out of 4 correct to pass.
Are you ready to take the test?
*Wait for the member to respond.*
1. When filling security, which webpages should you open?
(Correct answer: The security search feature on the portal and the Do Not Hire list.)
2. If a user does not appear on the portal's security search, should you let them in?
(Correct answer: No, do not let someone in without an existing log on the portal.)
3. The portal's security search gives you a yellow status. Should you let the user enter base?
(Correct answer: Yes, however remind the user to use the dedicated OP+ gate to enter base next time.)
4. An HDA member keeps being impatient. What you should do?
(Correct answer: politely ask them to calm down. Use the -kick if they begin to disrupt you or other people in base.)
*If the member answers 3 out of 4 correctly, finish training by congratulating them. Otherwise, return to the relevant sections of the script.*
Congratulations! You have officially passed the test.
Please change your motto to [HDA] Security Member I [TAG]
Please remember that you will always have priority at FS. If seats are filled, just request for one.
You can either FS or FTF for at least an hour to earn your pay badge.
However, you can get promoted faster by filling security rather than filling the front desks.
Any questions?
*Answer any questions regarding SEC.*
You may now wear the SEC badge and fill security in base. Good luck!